SCALPNET BIO 37

CLEANER HARMLESS TO BRICK AND SENSITIVE FACADE COATINGS

Environment friendly cleaner for silica containing materials, bricks, ceramics, cobbles, It does not contain hazardous products, no need to neutralise surface after rinsing.

I- PROPERTIES

SCALPNET BIO 37 takes place in the new generation of cleansers. It is formulated with raw material which are not dangerous for man.

SCALPNET BIO 37 is free of sodium or potassium hydroxides, therefore a surface treated with SCALPNET BIO 37 does not need neutralisation after rinsing.

As an homogeneous gel, SCALPNET BIO 37 it is easily applied on substrate without usual drawbacks of dangerous products, corrosive or toxic.

II- CHARACTERISTICS

Visual aspect: greenish viscous liquid

Specific gravity: 1.1 g/cm³ at 20_C

pH: 8,5

flash point : non flammable

Efficiency: 150 to 200 g/m²

sensitive to freezing, but freeze thaw stable

III- INSTRUCTIONS FOR USE

SCALPNET BIO 37 must be applied as delivered and not be diluted

Apply product with a brush or roller, or spray it with low pressure spray gun. Proceed in an ambient temperature between 5 and 50 _C.

Let stand by for one or more hours.

Rinse with water under pressure (100-150 bars) , no need to neutralise rinsed surface

Tools can be cleaned with tap water.

IV- WARNING

SCALPNET BIO 37 does not contain hazardous products and therefore does not call for special care. However, product can irritate, depending upon people sensitivity. We recommend workers wear protective clothing, gloves and goggles.

When accidentally in contact with skin and eyes, immediately wash with water and soap.

Important: Information contained here above is the result of our experience with the product. We can not be held responsible for any particular use of the product. It is recommended to make a trial prior to using product.