SCALPIK DECAP SEC 77

WOOD COATINGS REMOVER

I- PROPERTIES

SCALPIK DECAP SEC 77 contains methylene chloride. This remover is effective on paints, varnishes for wood, joinery. It does not damage wood and restores wood natural aspect, it respects wood lustre,

SCALPIK DECAP SEC 77 leaves a dry residue, easy to remove and dispose of.

II- CHARACTERISTICS

Visual aspect: clear liquid

Specific gravity: 1.20-1,23 g/cm³ at 20_C

pH: neutral

Efficiency: 100 to 200 g/m²

III- INSTRUCTIONS FOR USE

Apply product with a brush or spray over the coating, when ambient temperature is between 5_c and 50_c.

Let it operate for 5 to 10 minutes.

Remove all desegregated paint and recover it in appropriate package, for later disposal.

To finish up, scrub it with a pad of steel wool, wetted with SCALPIK DECAP SEC 77, rub with the grain.

Wipe it off with a damp rag.

IV- WARNING

This product harms rubber, and organic products that are solvent sensitive.

Avoid contact with skin and eyes, wear protective gloves and goggles.

Avoid breathing the vapours, do not eat nor smoke when using the product.

Work in a ventilated area.

Important: Information contained here above is the result of our experience with the product. We can not be held responsible for any particular use of the product. It is recommended to make a trial prior to using product.