SCALP ANTI STAIN 07

Non film forming water AND GREASE proofing

Waterborne

Water grease proofing, non film forming, based on waterborne fluoro-acrylic resins. Protected porous material against staining by oily dirt

I- PROPERTIES

SCALP ANTI STAIN 07 is not film forming and formulated with water borne fluoro-acrylic resins. SCALP ANTI STAIN 07 avoids penetration of grease, organic or mineral oils into porous materials.

SCALP ANTI STAIN 07 is effective for water and grease proofing of stones, marble, and rough casts, cement renderings or imprecate cobbles.

II- CHARACTERISTICS

Visual aspect: yellowish transparent liquid

Specific gravity: 1 g/cm³ at 20_C

pH: 7

flash point : none

Efficiency: 400 to 600 g/m² depending upon substrate

Sensitive to freezing

Ambient application temperature : 5 to 50 _C

III- INSTRUCTIONS FOR USE

Apply SCALP ANTI STAIN 07 over a dry and grease free surface, with a roller, or spray it until saturation of substrate. If necessary apply one more coat after drying.

To obtain a regular aspect, avoid local excess of product

Anti stain properties are obtained after complete drying.

Protected surface can be cleaned with water and soap.

Tools can be cleaned up with water prior to drying.

IV- WARNING

SCALP ANTI STAIN 07 operates only on porous substrates.

SCALP ANTI STAIN 07 is not hazardous, however we recommend workers wear protective clothing, gloves and goggles.

Store product in its original packaging, in a cool area, away of heat and bad weather.

Important: Information contained here above is the result of our experience with the product. We can not be held responsible for any particular use of the product. It is recommended to make a trial prior to using product.